Home / Curing Equipment

  • Powerline AC/IC & LED powerdrive IC

    The Powerline AC/IC 820 is a high intensity, air cooled LED array that is ideal for curing UV and visible light curable adhesives and coatings.

     
  • LC-2 Mini Conveyor

    LC-2 Mini Conveyor

    Perfectly suited for LED systems, the Tangent LC-2 Mini Conveyor provides a new option for curing adhesives in cleanrooms and tight work areas. Even the smallest workbench can accommodate this conveyor’s two foot length! Clean […]

     
  • UVAPRINT 100-200 HPV

    UVAPRINT 100-200 HPV

    The UVAPRINT 100-200 HPV is compact source of high-intensity ultraviolet radiation. Various lamp lengths and spectra are available to precisely match the curing requirements of the application. A built-in clamshell shutter (pneumatic or electric) allows this UV curing system to be used at a stationary work area or mounted over a conveyorized assembly process. The power supply provides a choice of 1kW or 2kW of power. Dichroic reflectors and the Advanced Cold Mirror (ACM) provide options for significant heat reduction and control.

     
  • UVAHAND LED

    UVAHAND LED

    UVAHAND LED is a high-intensity hand-held UV lamp. It is easy to transport, ergonomically designed and ideal for mobile use. Its high intensity irradiation ensures reliable production results within seconds. Available in 365nm or 405nm wavelengths, the UVAHAND LED provides edge-to-edge homogeneous intensity distribution for optimized curing. The high intensity of the 365nm UVAHAND LED brightly illuminates fluorescing compounds for the highest quality inspection processes.

     
  • LED Cube 100

    LED Cube 100

    The Hoenle LED Cube 100 is a compact irradiation chamber that can be used in a laboratory or for manual production. By employing the various LED array options, the emission range can be adjusted to various fields of application. Wavelength options include 365, 385, 395, 405, and 460nm. The chamber door is fully integrated with the controller which prevents its opening while in a curing cycle.

     
  • bluepoint LED eco

    bluepoint LED eco

    The Hoenle bluepoint LED eco curing system was developed for automated UV adhesive bonding processes requiring high intensity UV curing equipment, (point sources). It possesses the same features as the Hoenle bluepoint LED with a much smaller power control unit, (65 x 160 x 130 mm). This reduces space consumption in automated assembly lines. Producing up to 16,000 mW/cm2 of intensity, the bluepoint LED offers wavelength options that include 365, 385, and 405nm. UV bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes.

     
  • LEDcure UV Adhesives

    LEDcure UV Adhesives

    Specifically formulated for lower intensity, isolated wavelength curing, LEDcure UV adhesives and sealants deliver all the efficiencies and benefits expected from LED curing including cooler curing temperatures, instant on/off control without shutter mechanisms, and long operating life.

     
  • UVACUBE 400

    UVACUBE 400

    The UVACUBE 400 is an economical UV curing chamber for laboratory use and manual manufacturing processes. Due to various lamp/filter combinations, the spectra can be easily adapted for a large variety of applications. A light footprint of 300 x 400mm is produced inside the chamber. For maximum safety, an interlocking feature prevents the door from being opened when the shutter is open, and also locks the shutter closed when the door is open.

     
  • LED Spot 100

    LED Spot 100

    The LED Spot 100 system was developed for UV adhesive curing applications requiring high intensity irradiance over a large area. The modular LED head can be mounted at any angle or position to create the optimal UV curing process. Up to three LED Spot 100 heads can be actuated from a single LED Powerdrive control unit. The combination of electronic power control and the high quality LED array generate high intensity and homogenous distribution of UV light. The LED Spot 100 is available in 365, 385, 395, 405, and 460 nm wavelengths.

     
  • UVASPOT

    UVASPOT

    The Hoenle UVASPOT systems are modular, high intensity UV Wide Area Curing units. They achieve very high uniformity throughout the irradiation field. Various lamp/filter combinations are available, which allows the spectra output to be easily adapted to a large variety of applications. The lamp housing can easily be mounted at a workstation or integrated into an automated process.

     
  • LED UV and Visible Light Curing Equipment

    LED UV and Visible Light Curing Equipment

    Hönle LED UV and LED Visible Light curing equipment offers unique features including intensity output control, multi-cycle programmability, RS232 interface for external programming and operation, and menus that can be displayed in four languages. As LEDs do not emit IR energy, curing occurs at cooler temperatures. This makes LED equipment ideally suited for use with temperature sensitive substrates.

     
  • Needle Assembly Video

    Needle Assembly Video

    This video shows the assembly of cannulas and syringes on a indexing rotary table, automated assembly line. UV cure adhesives from Tangent Industries Inc. and Bluepoint LED UV curing equipment from Hönle are used on to instantly bond needles in place on a syringe. LEDcure adhesive 7041 is dispensed from air-pressure activated valves into the hubs of preassembled syringes, Honle’s Bluepoint LED point source light is activated, curing the adhesive. The completed syringe/needle is ready for packaging.

     
  • UV Meter

    UV Meter

    UV Meter by Hönle measures UV intensity and dosage for UV spot and flood cure units. Measure intensity and dosage with up to 8 interchangeable sensors, two channel measuring for different wavelength spectra, data storage, auto start, automatic switching between measurement ranges, displays in mW/cm², W/cm² or W/m², integrated real-time clock, RS232 interface for transmission and evaluation of measured values at the computer.

     
  • bluepoint 4 ecocure

    bluepoint 4 ecocure

    The Hoenle bluepoint 4 ecocure an economical UV curing point source that is ideally suited for manual workstations and benchtop assembly operations. This unit offers high intensity output, dose programmability, and long lamp life. Liquid or fiber optic light guides deliver UV curing energy to the precise location of the UV curable material. This unit is ideally suited for UV curable adhesives, coatings, and sealants.

     
  • bluepoint 4

    bluepoint 4

    The bluepoint 4 curing system from Hoenle is a high-performance point source for all UV curing applications that need maximum intensity. Due to its high power and the ability to program complete exposure sequences with various intensities and dwell times, the bluepoint 4 can provide the shortest curing cycle times for manual or automated production processes.

     
  • LED UV Pen

    LED UV Pen

    The LED Pen 2.0 from Hoenle is reliable and versatile hand-held UV curing device with output of 365nm wavelength. It produces up to 4800 mW/cm2 of UV curing intensity which is ideal for curing many UV adhesives and sealants. The LED Pen can be activated in three ways: a manual push-button switch on the unit, foot switch, or through a potential-free PLC input.

     
  • LED Spot

    LED Spot

    The LED Spot and LED HP controller with Process Flow Control was developed by Hoenle for all applications requiring high intensity UV irradiation. Curing intensity up to 10,000 mW/cm2 at 460nm wavelength is achievable with edge to edge uniformity over a 20 x 20mm footprint. The compact, modular LED head is easily integrated into automated assembly processes.

     
  • bluepoint LED

    bluepoint LED

    The Hoenle bluepoint LED curing system was developed for UV adhesive bonding applications requiring high intensity UV curing equipment, (point sources). Producing up to 16,000 mW/cm2 of intensity, the bluepoint LED offers wavelength options that include 365, 385, and 405nm. UV bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes. Programmable activation, multi-head capacity, short curing cycles, and long-term reliability make the bluepoint LED the perfect UV LED curing equipment for manual or automated production.

     
  • LED Power Pen

    LED Power Pen

    The LED Power Pen 2.0 from Hoenle is a high intensity, hand-held UV curing device that is ideally suited for curing UV adhesives in manual or automated production. Weighing only 130 grams, the LED Power Pen produces 10,000 mW/cm2 of UV intensity at 365nm wavelength at a distance of 12mm. The Power Pen can be activated in three ways: a manual push-button switch on the unit, foot switch, or through a potential-free PLC input.

     
  • LED Spot W

    LED Spot W

    The LED Spot W manufactured by Hoenle offers very high intensity for rapid curing of most UV adhesives, coatings, and sealants. Compact in size, the Spot W LED head can be easily mounted in space-limited assembly equipment. A 20 x 20mm aperture produces a homogenous light footprint with intensity as high as 20,000 mW/cm2 (405nm). Up to three Spot W LED heads can be actuated from a single LED Powerdrive control unit. Cleanroom compatible, the LED Spot W is available in 365, 385, 395, 405, and 460 nm wavelengths.

     
  • LED Powerline

    LED Powerline

    The LED Powerline from Hoenle is a very compact, high-intensity LED curing unit. Delivering over 20,000 mW/cm2 intensity, the LED Powerline is ideal for high-volume curing processes that incorporate robots or conveyors. From its standard size of 76 x 10 mm, the irradiated area can be extended in 40mm increments to any length required. Instant high intensity with no warm-up, and clean room compatible.

     
  • UV and UV/Visible Light LED Curing Units

    UV and UV/Visible Light LED Curing Units

    LED curing equipment from Hoenle provides versatile processing solutions for LED curable adhesives, coatings, and sealants. Advantages of LED curing include cooler curing temperatures, instant on/off control without shutter mechanisms, and long operating life. Tangent is the US distributor for Hoenle’s complete line of UV and visible light LED curing systems which include LED spot, LED flood, and portable hand-held LED units.

     
  • UVAHAND 250

    UVAHAND 250

    The Hoenle UVAHAND 250 is a high intensity hand-held UV curing device, used for wide area curing. The broad spectrum UV lamp facilitates fast and optimal curing of UV adhesives, UV masks, coatings, and sealants. Long lamp life and dependable operation makes this UV curing system ideal for start-ups as well as large scale production facilities.

     
  • Hoenle UV Curing Equipment

    Hoenle UV Curing Equipment

    Our comprehensive line of Hoenle UV curing systems can significantly optimize the curing (hardening) of UV curable adhesives, coatings, and sealants. Tangent Industries offers a broad line of Hoenle UV systems including LED curing equipment, UVAHAND (Hand Held UV curing equipment), Bluepoint (UV spot curing systems with light guide), UVASPOT (large area UV curing equipment) and more!

     
  • UV Spot Curing Systems from Hoenle

    UV Spot Curing Systems from Hoenle

    UV Spot Curing systems, also known a Point Sources, deliver maximum doses of UV intensity in small diameter footprints. Hoenle offers broad spectrum UV Spot curing units (320-460nm) as well as monochromatic LED Spot Curing system producing wavelengths of 365, 385, or 405nm. Features include intensity output control, multi-cycle programmability and RS232 interface for external programming and operation. As LEDs do not emit IR energy, curing occurs at cooler temperatures. This makes LED equipment ideally suited for use with temperature sensitive substrates.