• Powerline AC/IC & LED powerdrive IC

    The Powerline AC/IC 820 is a high intensity, air cooled LED array that is ideal for curing UV and visible light curable adhesives and coatings.

     
  • LED Cube 100

    LED Cube 100

    The Hoenle LED Cube 100 is a compact irradiation chamber that can be used in a laboratory or for manual production. By employing the various LED array options, the emission range can be adjusted to various fields of application. Wavelength options include 365, 385, 395, 405, and 460nm. The chamber door is fully integrated with the controller which prevents its opening while in a curing cycle.

     
  • bluepoint LED eco

    bluepoint LED eco

    The Hoenle bluepoint LED eco curing system was developed for automated UV adhesive bonding processes requiring high intensity UV curing equipment, (point sources). It possesses the same features as the Hoenle bluepoint LED with a much smaller power control unit, (65 x 160 x 130 mm). This reduces space consumption in automated assembly lines. Producing up to 16,000 mW/cm2 of intensity, the bluepoint LED offers wavelength options that include 365, 385, and 405nm. UV bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes.

     
  • LEDcure UV Adhesives

    LEDcure UV Adhesives

    Specifically formulated for lower intensity, isolated wavelength curing, LEDcure UV adhesives and sealants deliver all the efficiencies and benefits expected from LED curing including cooler curing temperatures, instant on/off control without shutter mechanisms, and long operating life.

     
  • LED Spot 100

    LED Spot 100

    The LED Spot 100 system was developed for UV adhesive curing applications requiring high intensity irradiance over a large area. The modular LED head can be mounted at any angle or position to create the optimal UV curing process. Up to three LED Spot 100 heads can be actuated from a single LED Powerdrive control unit. The combination of electronic power control and the high quality LED array generate high intensity and homogenous distribution of UV light. The LED Spot 100 is available in 365, 385, 395, 405, and 460 nm wavelengths.

     
  • LED UV and Visible Light Curing Equipment

    LED UV and Visible Light Curing Equipment

    Hönle LED UV and LED Visible Light curing equipment offers unique features including intensity output control, multi-cycle programmability, RS232 interface for external programming and operation, and menus that can be displayed in four languages. As LEDs do not emit IR energy, curing occurs at cooler temperatures. This makes LED equipment ideally suited for use with temperature sensitive substrates.

     
  • Needle Assembly Video

    Needle Assembly Video

    This video shows the assembly of cannulas and syringes on a indexing rotary table, automated assembly line. UV cure adhesives from Tangent Industries Inc. and Bluepoint LED UV curing equipment from Hönle are used on to instantly bond needles in place on a syringe. LEDcure adhesive 7041 is dispensed from air-pressure activated valves into the hubs of preassembled syringes, Honle’s Bluepoint LED point source light is activated, curing the adhesive. The completed syringe/needle is ready for packaging.

     
  • LED UV Pen

    LED UV Pen

    The LED Pen 2.0 from Hoenle is reliable and versatile hand-held UV curing device with output of 365nm wavelength. It produces up to 4800 mW/cm2 of UV curing intensity which is ideal for curing many UV adhesives and sealants. The LED Pen can be activated in three ways: a manual push-button switch on the unit, foot switch, or through a potential-free PLC input.

     
  • LED Spot

    LED Spot

    The LED Spot and LED HP controller with Process Flow Control was developed by Hoenle for all applications requiring high intensity UV irradiation. Curing intensity up to 10,000 mW/cm2 at 460nm wavelength is achievable with edge to edge uniformity over a 20 x 20mm footprint. The compact, modular LED head is easily integrated into automated assembly processes.

     
  • bluepoint LED

    bluepoint LED

    The Hoenle bluepoint LED curing system was developed for UV adhesive bonding applications requiring high intensity UV curing equipment, (point sources). Producing up to 16,000 mW/cm2 of intensity, the bluepoint LED offers wavelength options that include 365, 385, and 405nm. UV bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes. Programmable activation, multi-head capacity, short curing cycles, and long-term reliability make the bluepoint LED the perfect UV LED curing equipment for manual or automated production.

     
  • LED Power Pen

    LED Power Pen

    The LED Power Pen 2.0 from Hoenle is a high intensity, hand-held UV curing device that is ideally suited for curing UV adhesives in manual or automated production. Weighing only 130 grams, the LED Power Pen produces 10,000 mW/cm2 of UV intensity at 365nm wavelength at a distance of 12mm. The Power Pen can be activated in three ways: a manual push-button switch on the unit, foot switch, or through a potential-free PLC input.

     
  • LED Spot W

    LED Spot W

    The LED Spot W manufactured by Hoenle offers very high intensity for rapid curing of most UV adhesives, coatings, and sealants. Compact in size, the Spot W LED head can be easily mounted in space-limited assembly equipment. A 20 x 20mm aperture produces a homogenous light footprint with intensity as high as 20,000 mW/cm2 (405nm). Up to three Spot W LED heads can be actuated from a single LED Powerdrive control unit. Cleanroom compatible, the LED Spot W is available in 365, 385, 395, 405, and 460 nm wavelengths.

     
  • LED Powerline

    LED Powerline

    The LED Powerline from Hoenle is a very compact, high-intensity LED curing unit. Delivering over 20,000 mW/cm2 intensity, the LED Powerline is ideal for high-volume curing processes that incorporate robots or conveyors. From its standard size of 76 x 10 mm, the irradiated area can be extended in 40mm increments to any length required. Instant high intensity with no warm-up, and clean room compatible.

     
  • UV and UV/Visible Light LED Curing Units

    UV and UV/Visible Light LED Curing Units

    LED curing equipment from Hoenle provides versatile processing solutions for LED curable adhesives, coatings, and sealants. Advantages of LED curing include cooler curing temperatures, instant on/off control without shutter mechanisms, and long operating life. Tangent is the US distributor for Hoenle’s complete line of UV and visible light LED curing systems which include LED spot, LED flood, and portable hand-held LED units.