Home / Curing Equipment / Point Curing (Spot)

  • bluepoint LED eco

    bluepoint LED eco

    The Hoenle bluepoint LED eco curing system was developed for automated UV adhesive bonding processes requiring high intensity UV curing equipment, (point sources). It possesses the same features as the Hoenle bluepoint LED with a much smaller power control unit, (65 x 160 x 130 mm). This reduces space consumption in automated assembly lines. Producing up to 16,000 mW/cm2 of intensity, the bluepoint LED offers wavelength options that include 365, 385, and 405nm. UV bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes.

     
  • LED Spot 100

    LED Spot 100

    The LED Spot 100 system was developed for UV adhesive curing applications requiring high intensity irradiance over a large area. The modular LED head can be mounted at any angle or position to create the optimal UV curing process. Up to three LED Spot 100 heads can be actuated from a single LED Powerdrive control unit. The combination of electronic power control and the high quality LED array generate high intensity and homogenous distribution of UV light. The LED Spot 100 is available in 365, 385, 395, 405, and 460 nm wavelengths.

     
  • UVASPOT

    UVASPOT

    The Hoenle UVASPOT systems are modular, high intensity UV Wide Area Curing units. They achieve very high uniformity throughout the irradiation field. Various lamp/filter combinations are available, which allows the spectra output to be easily adapted to a large variety of applications. The lamp housing can easily be mounted at a workstation or integrated into an automated process.

     
  • bluepoint 4 ecocure

    bluepoint 4 ecocure

    The Hoenle bluepoint 4 ecocure an economical UV curing point source that is ideally suited for manual workstations and benchtop assembly operations. This unit offers high intensity output, dose programmability, and long lamp life. Liquid or fiber optic light guides deliver UV curing energy to the precise location of the UV curable material. This unit is ideally suited for UV curable adhesives, coatings, and sealants.

     
  • bluepoint 4

    bluepoint 4

    The bluepoint 4 curing system from Hoenle is a high-performance point source for all UV curing applications that need maximum intensity. Due to its high power and the ability to program complete exposure sequences with various intensities and dwell times, the bluepoint 4 can provide the shortest curing cycle times for manual or automated production processes.

     
  • bluepoint LED

    bluepoint LED

    The Hoenle bluepoint LED curing system was developed for UV adhesive bonding applications requiring high intensity UV curing equipment, (point sources). Producing up to 16,000 mW/cm2 of intensity, the bluepoint LED offers wavelength options that include 365, 385, and 405nm. UV bonding can be optimized with focusing lenses that adjust light footprint and intensity to create application-specific curing processes. Programmable activation, multi-head capacity, short curing cycles, and long-term reliability make the bluepoint LED the perfect UV LED curing equipment for manual or automated production.

     
  • UV Spot Curing Systems from Hoenle

    UV Spot Curing Systems from Hoenle

    UV Spot Curing systems, also known a Point Sources, deliver maximum doses of UV intensity in small diameter footprints. Hoenle offers broad spectrum UV Spot curing units (320-460nm) as well as monochromatic LED Spot Curing system producing wavelengths of 365, 385, or 405nm. Features include intensity output control, multi-cycle programmability and RS232 interface for external programming and operation. As LEDs do not emit IR energy, curing occurs at cooler temperatures. This makes LED equipment ideally suited for use with temperature sensitive substrates.