Home / Technical Library

  • Chip-In-Place Glue Chipping

    Instructive guidelines for the decorative art of glue chipping glass using our QuickChip88® and QuickChip88GEL® with UV light curing.

     
  • UV Curing Equipment Brochures

    From our Tech Library, PDFs for UV Light curing equipment.

     
  • Technical Data Sheets

    Some TDS files require you to be logged in before you will be allowed to download them. | Register | Log In |

     
  • Technical Library

    Our technical library contains all the technical data for our light curable chemistry including technical data sheets (TDS) and special instructions for their use. We have owners/users manuals for our LED UV and visible light curing equipment. And please check our frequently asked questions section to quickly answer the most commonly asked questions.

     
  • User Manuals

    From our Tech Library, users manuals for UV Light curing equipment.

     
  • Needle Assembly Video

    Needle Assembly Video

    This video shows the assembly of cannulas and syringes on a indexing rotary table, automated assembly line. UV cure adhesives from Tangent Industries Inc. and Bluepoint LED UV curing equipment from Hönle are used on to instantly bond needles in place on a syringe. LEDcure adhesive 7041 is dispensed from air-pressure activated valves into the hubs of preassembled syringes, Honle’s Bluepoint LED point source light is activated, curing the adhesive. The completed syringe/needle is ready for packaging.

     
  • Figure 4: Cured Polymer After Fracturing

    Chip-In-Place Chipping Process

    Chip-In-Place — Innovative new technology for producing decorative glass in hours, not days! Simply apply Chip-In-Place to sand-blasted or acid etched glass surfaces and cure in seconds under UV light. After curing (hardening), the polymer does all the work, chipping decorative and unique patterns into glass surfaces. Just like sea shells and snowflakes, no two patterns are truly identical. Also available in gel for curved or upright glass surfaces.

     
  • Figure 2: Fine Chip Pattern

    Chip-In-Place Pattern Guidelines

    Chip-In-Place — Innovative new technology for producing decorative glass in hours, not days! Simply apply Chip-In-Place to sand-blasted or acid etched glass surfaces and cure in seconds under UV light. After curing (hardening), the polymer does all the work, chipping decorative and unique patterns into glass surfaces. Just like sea shells and snowflakes, no two patterns are truly identical. Also available in gel for curved or upright glass surfaces.

     
  • Figure 1:  Chip-In-Place™ Bowl

    Chip-In-Place Application

    Chip-In-Place — Innovative new technology for producing decorative glass in hours, not days! Simply apply Chip-In-Place to sand-blasted or acid etched glass surfaces and cure in seconds under UV light. After curing (hardening), the polymer does all the work, chipping decorative and unique patterns into glass surfaces. Just like sea shells and snowflakes, no two patterns are truly identical. Also available in gel for curved or upright glass surfaces.

     
  • Glue Chipping Glass With UV Light

    Glue Chipping Glass With UV Light

    Chip-In-Place — Innovative new technology for producing decorative glass in hours, not days! Simply apply Chip-In-Place to sand-blasted or acid etched glass surfaces and cure in seconds under UV light. After curing (hardening), the polymer does all the work, chipping decorative and unique patterns into glass surfaces. Just like sea shells and snowflakes, no two patterns are truly identical. Also available in gel for curved or upright glass surfaces.