Home / Curing Equipment / UV Meter

UV Meter

High End Version

Measurement of UV intensity and dosage for spot and flood cure units

  • Intensity and dosage measurement with up to 8 interchangeable sensors (automatic sensor recognition)
  • Two channel measuring for different wavelength spectra
  • Data storage for recording measurement sequences
  • Auto start of measurement when minimum values are exceeded
  • Automatic switching between measurement ranges
  • Measurement values displayed in different units (mW/cm², W/cm² or W/m²)
  • Integrated real-time clock (e.g. for documentation purposes and long-term measurements)
  • Docking station with accumulator charging connection and RS232 interface for transmission and evaluation of measured values at the computer

Basic Version

In contrast to high end version

  • Only one-channel measurement
  • No data storage
  • No docking station, i.e. no accumulator charging connection
  • No RS232 interface
  • No power pack

Accessories:

Single sensors

  • UVA (330 nm – 400 nm); maximum intensity 5 W/cm²
  • UVB (290 nm – 330 nm); maximum intensity 2 W/cm²
  • UVC (230 nm – 285 nm); maximum intensity 2 W/cm²
  • VIS (380 nm – 550 nm); maximum intensity 2 W/cm²
  • LED; maximum intensity 20 W/cm²

Light guide and quartz rod sensors

  • UVA (330 nm – 400 nm); maximum intensity 20 W/cm²
  • UVC (230 nm – 285 nm); maximum intensity 2 W/cm²
  • quartz rod sensor UVA (330 nm – 400 nm); maximum intensity 5 W/cm²
  • VIS (380 nm – 550 nm), maximum intensity 2 W/cm²

Additional UV equipment, including custom curing systems, is available from Hönle. Contact Application Engineering at Tangent Industries to discuss your UV requirements to obtain an equipment and process recommendation.

UV-Meter
UV-Meter
UV_Meter_e.pdf
490.2 KiB
Details...