Home / Products / Adhesives

  • UV and UV/Visible Light Curable Adhesives

    UV and UV/Visible Light Curable Adhesives

    LED, UV and UV/Visible light curable adhesives are used in a wide range of industrial applications for bonding, sealing, and coating of components and assemblies. These single component formulations are solvent-free, and fully cure (harden) in seconds when exposed to Ultraviolet (UV) or UV/Visible light energy.

  • LEDcure UV Adhesives

    LEDcure UV Adhesives

    Specifically formulated for lower intensity, isolated wavelength curing, LEDcure UV adhesives and sealants deliver all the efficiencies and benefits expected from LED curing including cooler curing temperatures, instant on/off control without shutter mechanisms, and long operating life.

  • UV/Visible Cationic Epoxies

    UV/Visible Cationic Epoxies

    Light curable cationic epoxies from Panacol-Elosol absorb light energy to generate ions that initiate an ionic polymerization process. Advantages of this process are dry, tack-free surface, no shrinkage, low odor, better adhesion, abrasion and chemical resistance, high strength, extreme clarity, and moisture resistance. NEW, LED curable epoxies are now available!

  • Room Temperature & Thermal Cure Epoxies

    Room Temperature & Thermal Cure Epoxies

    Room temperature and thermal cure epoxies from Panacol-Elosol. Structalit epoxies are high performance adhesives, delivering superior strength, thermal stability, and chemical resistance. Elecolit epoxies combine thermal and electrical conductivity with excellent bond strength.

  • Electrically Conductive Adhesives

    Electrically Conductive Adhesives

    Electrically conductive adhesives (Elecolit brand from Panacol-Elosol) for die bonding, underfilling, antennae printing, flip-chips, LCD, and flex circuit assembly. Elecolit electrically conductive adhesives include thermally curable one and two-component products and a UV light curable adhesive, anisotropic adhesive series.

  • Thermally Conductive Adhesives

    Thermally Conductive Adhesives

    Thermally conductive adhesives will channel heat from the bonded component to the attached substrate that functions as a heat sink or dissipater. Thermally conductive epoxies from Panacol-Elosol are available in electrically conductive or non-conductive, one and two part epoxies, UV cure and thermal cure.

  • High Strength (Structural)

    High Strength (Structural)

    The Structalit® products are one and two-component multi-purpose adhesives that provide maximum bond strength and protection. A variety of Structalit adhesives are available for applications that include metal-to-metal bonding, ferrite bonding, temperature resistant plastic bonding, and component encapsulation..

  • High Temperature Adhesives

    High Temperature Adhesives

    For bonding applications involving operating temperatures ranging from 300°C to 1500°C, Cerastil brand adhesives from Panacol are formulated from inorganic materials of high purity, which allow them to be thermally stable in high heat environments. Several grades are available for high strength bonding of quartz, ceramic, glass, and metal.

  • Methacrylates


    Penloc GT methacrylate adhesives are two-component, acrylate based structural adhesives. The typical mix ratio of 1:1 means simple, less costly dispensing tools and systems, products can be mixed by a static mixing tip when dispensing, or dispense unmixed to apply as a bead-on-bead.